Two inside bladders for deep diving with no dry suit!!

Complete redundancy with one inflator and one OPR valve on each of the two bladders positioned one on the front and one in the back.

You can have two configurations. In the pictures you can see both:

1. the one in Kevlar (with a yellow stripe around) –>>the front bladder (closer to the diver) has an inflator coming over your left shoulder and the valve is in your standard position (down front lefthand side). The “secondary” or “emergency” back bladder (positioned closer to the cylinders) will have an inflator reaching over your right shoulder from the back. The release valve will be on the back of the bladder on your righthand side.
2. the one in Cordura where the front bladder (closer to the diver) has an inflator coming over your right shoulder and the valve is on your righthand side in the front. The “secondary” or “emergency” back bladder (positioned closer to the cylinders) will have an inflator reaching over your left shoulder from the back. The release valve will be on the back of the bladder on your lefthand side this time.

Which configuration do you prefer? Up to you, there is not rule nor standard.

Inside bladders – Nylon 290D

Outside bladder – any available fabric

Any embroidery can be made on your bladder for 20eur (size up to 50x220mm)